Z2350 Clamping Cylinder, Double-Acting
The new double-acting clamping
cylinders Z 2350 can be universally
used in tool and device construction as
well as for mechanical engineering,
especially in areas where short strokes
with high forces are required.
These double-acting cylinders are an
excellent alternative for carrying out
ejector and removal movements in
injection moulding and pressing
moulds.
The compact design of the clamping
cylinders with variable fastening options
facilitates the installation and, moreover,
ensures high operating pressures.
Fig. 1
Longitudinal screwing from the front
Fig. 2
Longitudinal screwing from the rear
Fig. 3
Fastening via cross bores.
In this fastening case, the cylinder
must be supported via adapter spring
Z 1558
-
Features
- Easy mounting.
- Double-acting.
- Variable fastening options.
- Particularly low leakage thanks to double hydraulic seal to the piston rod.
- Piston rod hardened and ground.
- Z 2350 is available in 3 sizes with three different strokes each.
Additional metallic stripper prevents penetration of dirt. Suitable connections and hoses can be found in the HASCO Hydraulics Range Z 2700.
