K2500 Split Mould Kit, Ejector Type
The new HASCO split mould kits
K2500 and K 2501 replace split
mould kits K 2000 and K 2010 .
The dimensions of K 2500 are
compatible with the HASCO
K programme.
-
Features
- To suit moulding geometry, the designer has the choice between Ejector type K 2500 and the Stripper type K 2201
- K2500 as well as K 2501 are available in 8 sizes with 5 split heights each.
- Splits (K 2528 ) and core retainer insert (K 2531 ) are not supplied.
- Construction elements and angle pins actuation are positioned within the mould.
- Regrindable split guides.
- Interchangeable wear plates.
- Splits (K 2528 ) can be fully utilized for cavity contour and cooling.
- Split length is equal to mould width.
- Parallel slot in K 2528 (Mat. 1.2767/ 1.2343 ESU) with dimensions re-ground according to hardness.
- Distortion on hardening of splits does not affect the guiding system.
- Length of core retainer insert (K 2531 ) is equal to mould width.
- Easy readjustment of dovetailed guide strips.
- No tilting of split guide due to favourable length /width ratio.
- Splits are secured by integrated spring plungers.
- Undisturbed drop of mouldings.
- Guide strips and guide bushings are offered in selflubricating design.
